What are the most important preventive maintenance operations on the braking system?

There are four preventive maintenance operations of the braking system that can prevent not only costly breakdowns due to a major problem, but also any safety incidents while driving.

The braking system is one of the most important active safety elements of the car. It is not for nothing that ABS has been responsible for saving thousands of lives over the past few decades. That is why it is so important that each element of the system is in perfect condition, which should be checked by a professional in a reliable workshop. Specifically, there are four parts of a car’s braking system that are always worth keeping an eye on, as they can not only prevent an accident, but also save you up to 1,500 euros in the event of a breakdown.

  1. Brake fluid

Firstly, the condition of the brake fluid is an element of the braking system that is sometimes overlooked, but is essential.

This is why it is advisable to carry out a simple operation such as bleeding the brake fluid, which, for a cost of between 40 and 80 euros per car, will ensure that the entire circuit is supplied with a correct, oxygen-free fluid, avoiding possible oxidation and, above all, a very serious breakdown that would require the replacement of the ABS body, at a cost of up to 1,500 euros.

  1. Brake pads

The second component of the braking system to be checked regularly is the brake pads. The cost of replacement, if they are in poor condition, usually ranges from 80 to 150 euros. Failure to replace them in time can damage the third key component, the brake discs, which cost an average of between 200 and 350 euros per axle to replace.

  1. Brake hoses

The third part to look out for is the hoses. This is a simple component to service and replace, costing between 30 and 70 euros. However, if the hose breaks, the vehicle loses brake fluid, which can be very dangerous as the vehicle automatically loses its brakes. It is therefore essential to check them at least once a year and replace them if they are cracked or torn.

  1. Brake pedal

Finally, REMSA also recommends that at the slightest sign of possible brake system failure (spongy brake pedal, metallic sounds or squeaks when braking, etc.), the wisest option is to take the vehicle to a workshop where a qualified professional can diagnose the possible problem.

Remsa products

REMSA PRODUCTS

Get to know our range of products for cars and commercial vehicles: brake pads, brake disc, brake shoes.

Related

Comentarios

Leave a Reply

Your email address will not be published.

No Comments

Do you like what you are reading?

Receive our content and outstanding news in your email for free.